PPGI HDG GI SECC DX51 14 Gauge 3.8mm Rolled Coil
Ana Tsara Takardar Karfe Mai Karfi a cikin Coil (GI) ta hanyar wuce Cikakken Takardar Hard Hard wanda ya sha tsarin wanke acid da jujjuyawar ta cikin tukunyar zinc, don haka ana amfani da fim ɗin zinc a farfajiya. Yana da kyakkyawan juriya na lalata, zane -zane, da aiki saboda halayen Zinc. Yawancin lokaci, galvanized karfe takardar da galvanized karfe nada tsari da kuma bayani dalla-dalla ne m guda.
Galvanizing mai ɗumi-ɗumi shine tsarin amfani da murfin zinc mai kariya zuwa takardar ƙarfe ko takardar ƙarfe, don hana tsatsa.
1.Excellent anti-corrosion, paintability, and processability saboda halin sadaukar da kai na tutiya.
2. Akwai don zaɓar da kuma samar da adadin da ake so na zinc gilded kuma musamman yana ba da damar yadudduka zinc (matsakaicin 275g/m2).
3.Classified a matsayin ko dai sifili spangle ko karin m dangane da ko takardar sha fata wuce magani
Galvanized Karfe Sheet & nada Material Iri
- Karfe na Kasuwanci (Nau'in CS A, B, da C)
- Ƙara Karfe (FS Nau'in A da B)
- Zurfin Zane Mai Zurfi (Nau'in DDS A da C)
- Ƙarin Karfe Zane Mai Ƙarfi (EDDS)
- Karfe Tsarin (SS) - Ƙarin maki ya ƙaddara (33,37,40,50,80)
- Ƙarfin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin (HSLAS)
| Kayayyaki: | Hot tsoma galvanized Karfe nada | Zinc Rufi: | 40 zuwa 275 g |
|---|---|---|---|
| Karfe Grade: | SGCC, SGCD3, SGCE, SGCH (Cikakken Hard), DX51D, DX53D, Q195, SGC490, ASTM A653 | Kauri: | 0.15-3.8mm |
| Nisa: | 800 -1000/1220/1250/1500mm | Spangle: | Spangle na yau da kullun, Ƙaramin Spangle, Babban Spangle Da Zero Spangle |
| Nada Weight: | 3-8 Ton Ga Galvalume Karfe Coil | Surface jiyya: | Hot Tsoma Galvanized |
| Aikace -aikacen: | Ginawa | ||
| Babban Haske: |
Saukewa: DX51, SECC nada birki, 3.8mm nada birki |
||
PPGI/HDG/GI/SECC DX51 Zinc Rufi Cold birgima/Hot tsoma galvanized Karfe nada
Saurin Sauri:
| Abu | SGCC, SGCH, G350, G450, G550, DX51D, DX52D, DX53D |
| Taurin | Mai taushi (HRB60), matsakaici mai ƙarfi (HRB60-85), Cikakken wuya (HRB85-95) |
| Maganin farfajiya | Chromated/Non-Chromated, Oiled/Non-Oil, Fata wucewa |
| 20 'nauyin akwati | 25-28tons (sai dai idan an iyakance nauyi a tashar jiragen ruwa) |
| Logo | An buga bisa ga ƙirar ku |
| Farashin | US $/TON FOB/CIF/CFR tashar jiragen ruwa |
Hotuna don murɗaɗɗen galvanized coil
Hotuna don zafi tsoma galvanized karfe nada
Aikace -aikace:
1. Gina: ɓangaren rufi da rufi, bangon waje na gine -ginen farar hula da na masana'antu, ƙofofin gareji da makafin taga.
2. Kayan gida: injin wanki, firiji, talabijin, injin kwandishan da tsarin samun iska, injin tsabtace ruwa, injin dumama ruwa.
3. Sufuri: rufin mota, Injin Mashin ɗin auto, garkuwar zafi na bututu mai fitarwa da mai jujjuyawa, babban jirgi na jirgin ruwa, shingen babbar hanya.
4. Masana'antu: Kayan masana'antu Masana'antar kula da wutar lantarki, kayan aikin firiji na masana'antu, injin siyarwa ta atomatik.
5. Furniture: fitila mai fitila, tebur, allon rubutu da kayan aikin likita da dai sauransu.
Takaddar Gwajin Mill: (JIS G 3302 SGCH)
| Tabbataccen Jiki | ||||||||||||
| A'a. | Zafi No. | Girman (mm) | Yawa | Sinadaran Sinadaran (%) | Karshe | |||||||
| MT | C | Si | Mn | P | S | Ƙarfin ƙarfi | Ƙara | Ƙarfin ƙarfi (N/mm2) | ||||
| (Mpa) | (%) | |||||||||||
| 1 | 121208102 | 0.14MM X 750MM X COIL | 0.05 | 0.02 | 0.33 | 0.014 | 0.015 | 650 | 15 | 550 | A | |
| 2 | 121208208 | 0.15MM X 750MM X COIL | 0.06 | 0.03 | 0.32 | 0.015 | 0.019 | 660 | 17 | 558 | A | |
| 3 | 121208214 | 0.20MM X 750MM X COIL | 0.06 | 0.03 | 0.34 | 0.020 | 0.021 | 655 | 16 | 560 | A | |
| 4 | 121208216 | 0.30MM X 750MM X COIL | 0.08 | 0.02 | 0.40 | 0.016 | 0.017 | 660 | 17 | 568 | A | |
M Riba:
Shirya hotuna:
